Skip to main navigation Skip to search Skip to main content

Mechanochemical preparation of Ag catalysts for the n-octane-SCR de-NOx reaction: Structural and reactivity effects

  • Kathryn Ralphs
  • , Sarayute Chansai
  • , Christopher Hardacre
  • , Robbie Burch
  • , S. F. Rebecca Taylor
  • , Stuart L. James
  • Queen's University Belfast

Research output: Contribution to journal › Article › peer-review

39 Downloads (Pure)

Abstract

Mechanochemical preparation of Ag/Al2O3 catalysts used for the selective catalytic reduction of NOx using hydrocarbons has been shown to substantially increase the activity of the catalyst in comparison with Ag/Al2O3 prepared by wet impregnation. The effect of using different ball-milling experimental parameters on both the structure of the material as well as the catalyst activity has been investigated and the optimum conditions established. A phase transition from γ- to α-alumina was observed milling at high speeds which was found to result in lower catalyst activities. At lower milling speeds both fracturing and agglomeration of the alumina support can be observed depending on the grinding time. However, due to ball-milling, a general enhancement in the NOx reduction activity was observed for all catalysts compared with the conventionally prepared catalysts irrespective of the reductant used. Transient DRIFTS-MS experiments were performed to investigate the effect of H2 in the absence and presence of water on the SCR reaction over catalysts prepared by both ball milling and wet impregnation. In-situ DRIFTS-MS analysis revealed significant differences in both gas phase and surface species. Most notably, isocyanate species were formed significantly more quickly and at higher surface concentration in the case of the mechanochemically prepared catalyst.

Original languageEnglish
Pages (from-to)198-206
Number of pages9
JournalCatalysis Today
Volume246
DOIs
Publication statusPublished (in print/issue) - 15 May 2015

Bibliographical note

Funding Information:
We gratefully acknowledge funding for this work from the Department of Education and Learning in Northern Ireland and the CASTech ( EP/G012156/1 ) and small equipment ( EP/K029371/1 ) grants from the EPSRC (U.K).

Publisher Copyright:
© 2014 Elsevier B.V. All rights reserved.

Funding

We gratefully acknowledge funding for this work from the Department of Education and Learning in Northern Ireland and the CASTech ( EP/G012156/1 ) and small equipment ( EP/K029371/1 ) grants from the EPSRC (U.K).

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 3 - Good Health and Well-being
    SDG 3 Good Health and Well-being

Keywords

  • Ag/AlO
  • Ball-milling
  • DRIFTS-MS
  • H effect
  • HC-SCR
  • isocyanates
  • n-octane
  • NO reduction
  • Transient kinetics

Fingerprint

Dive into the research topics of 'Mechanochemical preparation of Ag catalysts for the n-octane-SCR de-NOx reaction: Structural and reactivity effects'. Together they form a unique fingerprint.

Cite this