Skip to main navigation Skip to search Skip to main content

Experimental study of the flame behaviors and radiation impact of medium-scale pool fires with different ullage heights

Research output: Contribution to journal › Article › peer-review

20 Downloads (Pure)

Abstract

Tank fires represent a prevalent type of industrial hazard. The thermal radiation generated by the primary ignited vessel dictates the effectiveness and safety of emergency rescue interventions. Consequently, this study performed a series of medium-scale gasoline fire trials utilizing various pool diameters (D = 0.8, 1, and 1.5 m) and ullage heights to evaluate radiation impacts and flame dimensions. The findings reveal a four-stage combustion life cycle: initial development, steady burning, decay, and extinguishment. Specifically, within the steady-state phase, an inverse relationship was observed between the dimensionless ullage height (h* = h/D) and both the upper flame length (Lupper) and radiant heat, while the down-reaching flame length increases. For tank fires with ullage heights, the high-temperature sidewalls alter the radiative flux reaching neighboring targets, which is most pronounced during the decay phase when the fire is largely confined within the tank. Drawing upon these experimental measurements and dimensionless analysis, an empirical equation was established to determine the ratio of Lupper to the total flame length. After successfully validating this formulation against current and existing data, this correlation was subsequently incorporated into the standard solid flame model to account for the shielding effect of the heated tank sidewall, enabling prediction of external radiative fluxes with an overall prediction error within 15%. The results are of importance for understanding the flame behaviors and radiation impact of tank fires to improve firefighting and rescue efficiency.
Original languageEnglish
Article number111364
Pages (from-to)1-11
Number of pages11
JournalInternational Journal of Thermal Sciences
Volume232
Early online date25 Sept 2026
DOIs
Publication statusPublished online - 25 Sept 2026

Bibliographical note

Publisher Copyright:
Copyright © 2026. Published by Elsevier Masson SAS.

Rights Retention Statement

This Author Accepted Manuscript has been made open access under a Creative Commons Attribution 4.0 International licence (CC BY 4.0) under the terms of Ulster University Rights Retention Policy for Scholarly Works. To view a copy of this licence, visit https://creativecommons.org/licenses/by/4.0/.

Data Availability Statement

Data will be made available on request.

Funding

This research was sponsored by the Key Research and Development Program of Ordos City (No. YF20240006), the National Natural Science Foundation of China (No. 52522407), and the National Natural Science Foundation of China (No. 52474272).

FundersFunder number
YF20240006
National Natural Science Foundation of China52474272, 52522407

    UN SDGs

    This output contributes to the following UN Sustainable Development Goals (SDGs)

    1. SDG 7 - Affordable and Clean Energy
      SDG 7 Affordable and Clean Energy

    Keywords

    • Pool fires
    • Ullage height
    • Flame length
    • Flame radiation
    • Solid flame model

    Fingerprint

    Dive into the research topics of 'Experimental study of the flame behaviors and radiation impact of medium-scale pool fires with different ullage heights'. Together they form a unique fingerprint.

    Cite this