Advanced Future Materials and Manufacturing

Research output

Research output per year 1999 2001 2007 2008 2009 2010 2011 2012 2013 2015 2015

• 224 Citations
• 8 h-index
• 23 Article
• 7 Conference contribution
• 1 Chapter
• 1 Patent

Research output per year

Research output per year

Search results

• 2015

  Structural and frictional performance of fused deposition modelled acrylonitrile butadiene styrene (P430) with a view to use as rapid tooling material in sheet metal forming

  Leacock, A., Cowen, G., Cosby, M., Volk, G., McCracken, D. & Brown, D., 17 Mar 2015, In: Key Engineering Materials. 639, p. 325-332

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Metal Forming 100%
  • Fused Deposition Modeling 100%
  • Acrylonitrile Butadiene Styrene 100%
  • Rapid Tooling 100%
  • Sheet Metal Forming 100%
  12 Citations (Scopus)

• The finite element implementation, validation and verification of a plane stress yield criterion for use in sheet metal forming analysis

  Kilpatrick, W., Brown, D. & Leacock, A., 2015, In: International Journal of Mechanical Sciences. 101–10, p. 363 - 375

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Plane Stress 100%
  • Deep Drawing 100%
  • Metal Forming 100%
  • Finite Element Analysis 100%
  • Finite Element Method 100%
  8 Citations (Scopus)

• The influence of strain rate on the springback of commercially pure titanium in a stretch forming operation

  Leacock, A., Volk, G., McCracken, D., Brown, D. & Quinn, S., 17 Mar 2015, In: Key Engineering Materials. 639, p. 107-114

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Rates of Strain 100%
  • Pure Titanium 100%
  • Titanium 100%
  • Strain Rate 100%
  • Stress State 50%
  3 Citations (Scopus)
• 2013

  A Novel Process for the Manufacture of Extended Laminar FlowLipskins

  Leacock, A., 25 Mar 2013, In: Key Engineering Materials. 549, p. 3-12

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Laminar Flows 100%
  • Joints (Structural Components) 20%
  • Improve Efficiency 20%
  • Trailing Edge 20%
  • External Surface 20%

• Evolution of mechanical properties in a 7075 Al-alloy subject to natural ageing

  Leacock, A., howe, C., Brown, D., Lademo, O. & Deering, A., 1 Aug 2013, In: Materials and Design. 49, p. 160-167

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Test Data 100%
  • Heat Treatment 100%
  • Strain Hardening 100%
  • Yield Point 100%
  • Al Alloy 100%
  52 Citations (Scopus)

• Profile correction of a stretch formed aluminium alloy during artificial ageing

  Volk, G., Brown, D. & Leacock, A., 25 Mar 2013, In: Key Engineering Materials. 549, p. 213-219

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Artificial Ageing 100%
  • Creep 50%
  • Heat Treatment 50%
  • Natural Treatment 25%
  • Combined Process 25%
  2 Citations (Scopus)
• 2012

  Numerical Simulation of the Four Roll Bending Process

  Leacock, A., McCracken, D., Brown, D. & McMurray, R., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 370-376

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Roll Bending 100%
  • Aircraft 100%
  • Finite Element Modeling 100%
  • Experimental Result 33%
  • Limitations 33%
  12 Citations (Scopus)

• The Future of Sheet Metal Forming Research

  Leacock, A., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 366-369

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Sheet Metal Forming 100%
  • Metal Forming Process 50%
  32 Citations (Scopus)
• 2011

  The Influence of Through-Thickness Material Property Variation on Stretch Forming Springback

  McMurray, R., Leacock, A. & Brown, D., 2011, In: Key Engineering Materials. 473, p. 436-443

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Predicted Result 100%
  • Initial Investigation 100%
  • Material Thickness 100%
  • Materials Property 100%
  • Analytical Method 50%
  1 Citation (Scopus)

• The influence of uniaxial prestrain on biaxial r-values in 7075-O aluminium alloy

  Anderson, N., Brown, D., McMurray, R. & Leacock, A., 27 Apr 2011, In: AIP Conference Proceedings. 1353, p. 1435-1440

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Prestrain 100%
  • Test Method 33%
  • Test Procedure 33%
  • Strain Response 33%
  • Friction Condition 33%
  1 Citation (Scopus)
• 2010

  Analysis of the flexforming process using PAMSTAMP 2G

  Leacock, A., Ludlow, M., Howe, C. & McMurray, R., 20 May 2010, Unknown Host Publication. N/A

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Numerical Simulation of the four roll bending process

  Leacock, A., McCracken, D., Brown, D. & McMurray, R., 17 Jul 2010, Unknown Host Publication. Springer, p. 21-24 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  1 Citation (Scopus)

• The effect of serrated yielding on the determination of r-values in aluminium alloys and yield locus calibration

  Kilpatrick, W., Brown, D., McMurray, R. & Leacock, A., 2010, In: Materials Science and Engineering: A. 527, 29-30, p. 7557

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Plane Stress 100%
  • Critical Strain 50%
  • Longitudinal Axis 50%
  • Aging Time 50%
  • Heat Treatment Process 50%

• The effect of serrated yielding on the determination of r-values in aluminium alloys and yield locus calibration

  Kilpatrick, W., Brown, D., McMurray, R. & Leacock, A., 2010, In: Materials Science and Engineering: A. 527, 29-30, p. 7557-7564

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Plane Stress 100%
  • Biaxial Stress 50%
  • Plastic Strain 50%
  • Critical Strain 25%
  • Longitudinal Axis 25%
  12 Citations (Scopus)
• 2009

  Influence of pre-strain on the formability of 2024 aluminium alloy

  Bressan, J. & Leacock, A., 2009, In: International Journal of Material Forming. 2, S1, p. 475

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Modelling the Effect of Pre-Strain and Inter-Stage Annealing on the Stretch Forming of a 2024 Aluminium Alloy

  McMurray, R., O’Donnell, M., Leacock, A. & Brown, D., 2009, In: Key Engineering Materials. 410-41, p. 421

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• The evolution of yielding in 7075-O aluminium alloy: experimental observations and modelling

  Anderson, N., Leacock, A., McMurray, R. & Brown, D., 2009, In: International Journal of Material Forming. 2, S1, p. 403

  Research output: Contribution to journal › Article › peer-review

  Open Access
  5 Citations (Scopus)
• 2008

  Method for forming a sector for a nacelle lipskin

  Leacock, A. (Inventor), Ludlow, M. (Inventor), Brown, D. (Inventor) & McMurray, R. (Inventor), 10 Jul 2008, Patent No. WO 2010/003538 A1, Priority date 14 Jan 2010

  Research output: Patent

• Some observations on the technology of the English Cannon, Chapter 8

  Scott, B., Brown, R., Leacock, A. & Salter, C., 10 May 2008, Great Guns Like Thunder: The Cannon from The City of Derry. Guildhall Press, p. 179-198

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

• The Effect of Pre-Strain and Inter-Stage Annealing on the Formability of a 2024 Aluminium Alloy

  O’Donnell, M., Banabic, D., Leacock, A., Brown, D. & McMurray, R., 2008, In: International Journal of Material Forming. 1, S1, p. 253

  Research output: Contribution to journal › Article › peer-review

  Open Access
  9 Citations (Scopus)

• The Effect of Pre-Strain and Solution Heat Treatment on the Formability of a 2024 Aluminium Alloy

  O’Donnell, M., Leacock, A., Banabic, D., Brown, D. & McMurray, R., 2008, In: International Journal of Material Forming. 1, S1, p. 257

  Research output: Contribution to journal › Article › peer-review

  Open Access
  8 Citations (Scopus)
• 2007

  Double curvature springback in stretch formed 2024-T3 aluminium

  McMurray, R., Leacock, A. & Brown, D., Apr 2007, Unknown Host Publication. Key Engineering Materials: Scientific.Net, p. 391-398 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  1 Citation (Scopus)

• The influence of cladding on the springback of 2024-T3 aluminium alloy

  McMurray, R., Leacock, A. & Brown, D., 2007, Unknown Host Publication. Key Engineering Materials: Scientific.Net, p. 853-858 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• The influence of strain rate variations on the appearance of serrated yielding in 2024-T3 Al-clad aluminium alloy

  Leacock, A., McMurray, R., Brown, D. & Poston, K., Mar 2007, Unknown Host Publication. Conference Proceedings of ESAFORM 2007: AIP Publishing, p. 390-395 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)
• 2006

  A mathematical description of orthotropy in sheet metals

  Leacock, A., Feb 2006, In: Journal of the Mechanics and Physics of Solids. 54, 2, p. 425-444

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Instrument Calibration 100%
  • Test Data 50%
  • Plane Stress 50%
  • Alternative Form 50%
  • Constitutive Modeling 50%
  37 Citations (Scopus)
• 2004

  The influence of plastic strain ratios on the numerical modelling of stretch forming

  Gilmour, K., Leacock, A. & Ashbridge, M., Oct 2004, In: Journal of Materials Processing Technology. 152, 1, p. 116-125

  Research output: Contribution to journal › Article › peer-review
  12 Citations (Scopus)
• 2003

  The effect of prestrain on the springback of aluminium alloys during simple bending

  Leacock, A., Gilmour, K. & McMurray, R., Apr 2003, Unknown Host Publication. Ulster University, p. 116-125 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• 2002

  The influence of lubricant film thickness on friction coefficients during slow speed deep drawing operations

  Gilmour, K., Paul, S. & Leacock, A., Oct 2002, In: Journal of Tribology. 124, 4, p. 846-851

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)
• 2001

  Establishing the effectiveness of a lubricant in the deep drawing process by means of prior loading duration variation

  Ashbridge, M., Gilmour, K. & Leacock, A., 2001, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 215, 1, p. 19-24

  Research output: Contribution to journal › Article › peer-review

• The determination of in plane shear characteristics of aluminium alloys

  Gilmour, K., Leacock, A. & Ashbridge, M., Mar 2001, In: Journal of Testing and Evaluation. 29, 2, p. 131-137

  Research output: Contribution to journal › Article › peer-review

• The development of a procedure for the optimisation of stretch forming machine settings during the production of double curved skin components

  Leacock, A., Gilmour, K. & Poston, K., Jun 2001, Unknown Host Publication. ASM International, 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• 1999

  Solid modelling of a woven textile reinforcement: A prototype system for the automatic extraction of geometric data.

  Brown, D. & Morgan, M., 1999, In: Polymers and Polymer Composites. 7, 7, p. 461-463

  Research output: Contribution to journal › Article › peer-review

  2 Citations (Scopus)